How To Identify Your Tribeca Round Pool Components

Learn how to identify the different components of your Tribeca Round Pool.

Tribeca Round Pool Model

Parts Breakdown

Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Tribeca Round Swimming Pool Model.

Top Ledge – Reference D

Top Ledge

The Top Ledges (sometimes referred to as Top Rails) are the resin top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 7″ wide and are located at the very top of your pool.

Material: Coated Steel

Ref #	Description	Part #	Length	15'
D	Top Ledge	40352	55-1/8"	10

Ref #	Description	Part #	Length	18'	21'	24'	27'	30'	33'
D	Top Ledge	40352	55-1/8"	12	14	16	18	20	22

Top Track/Stabilizer – Reference F

Top Track

The Top Track Stabilizers are the tracks/rails that stabilize the top of the pool wall.

Material: Aluminum

Ref #	Description	Part #	Length	15'
F	Top Track/Stabilizer	38502	53-1/4"	11

Ref #	Description	Part #	Length	18'	21'	24'	27'	30'	33'
F	Top Track/Stabilizer	38503	54-1/8"	13
		38505	54-7/16"		15
		38506	52-1/4"			18
		38507	52-7/8"				20
		38509	51-1/4"					23
		38510	53-3/8"						24

Ledge Cover Inner/Outer – Reference B & C

Top Cap/Inner Ledge Cover for Preference & Tribeca Pool Models

Ledge Cover Inner

Top Cap/Outer Ledge Cover for Preference & Tribeca Pool Models

Ledge Cover Outer

The Ledge Covers consists of (2) parts. There is a Ledge Cover Inner which goes towards the inside of the pool. The Ledge Cover Outer will go towards the outside of the pool.

The Ledge Covers cover all of the hardware where your Top Ledges screw into the Top Plates.

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'	33'
B	Ledge Cover Inner	22121	10	12	14	16	18	20	22
C	Ledge Cover Outer	22120	10	12	14	16	18	20	22

Ledge Cover Top – Reference A

Ledge Cover Top

The Ledge Cover Tops are installed on top of the Ledge Cover Outer.

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'	33'
A	Ledge Cover Top	22122	10	12	14	16	18	20	22

Top Plate – Reference E

Top Joiner Plate for Round & Oval Curved Side Preference & Tribeca Pool Models

Top Plate

The Top Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Plates.

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'	33'
E	Top Plate	38488	10	12	14	16	18	20	22

Inner Upright – Reference G

Inner Upright

The Inner Uprights are the vertical posts on the outside of your swimming pool wall. Each Inner Upright connects to the Foot Covers (Boot).

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'	33'
G	Inner Upright	38591	10	12	14	16	18	20	22

Outer Upright – Reference H

Outer Upright

The Outer Uprights are the vertical posts that cover your Inner Uprights. Each Inner Upright connects to the Foot Covers (Boot).

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'	33'
H	Outer Upright	22130	10	12	14	16	18	20	22

Foot Cover (Boot) – Reference K

Bottom Joiner Plate/Upright Boot for Curved Side Preference & Tribeca Pool Models

Foot Cover (Boot)

The Foot Covers connect your Bottom Tracks together on a round pool. Your Uprights will also clip into these Foot Covers.

Ref #	Description	Part #	15'	18'	21'	24'	27'	30'	33'
K	Foot Cover (Boot)	22123	10	12	14	16	18	20	22

Coping Strips

Coping For Overlap Liners - 2ft. Section

Coping Strips

Overlap Liner Installation Using Coping Strips

An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner or J-Hook Liner, but they are included with the swimming pool. If using a Uni-Bead or J-Hook liner you can discard the coping strips.

Bottom Rail – Reference J

Bottom Rail

The Bottom Rail (sometimes referred to as Bottom Track) is where your pool wall sits.

The Bottom Rail inserts into the Foot Covers (Boots) on the swimming pool.