How To Identify Your
Intrepid Round Pool Components
Learn how to identify the different components of your Intrepid Round Pool.
Intrepid Round Pool Model
Parts Breakdown
Identifying the parts of your pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Intrepid Round Swimming Pool Model.
Top Ledge – Reference #6
Top Ledge
The Top Ledges (sometimes referred to as Top Rails) are the top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 8″ wide and are located at the very top of your pool.
Material: Extruded Aluminum
| Ref # | Description | Part # | Length | 15' | 18' | 21' | 24' | 27' |
|---|---|---|---|---|---|---|---|---|
| 6 | Top Ledge | 29802 | 51-5/32" | 11 | ||||
| 29803 | 51-29/32" | 13 | ||||||
| 29804 | 49-7/8" | 18 | 21 | |||||
| 29806 | 56" | 14 |
Top Track/ Inner Stabilizer – Reference #1
Top Track
The Top Track Stabilizers are the aluminum tracks that go over the Beaded Liner Track and stabilizes the top of the pool wall.
Material: Extruded Aluminum
| Ref # | Description | Part # | Length | 15' | 18' | 21' | 24' | 27' |
|---|---|---|---|---|---|---|---|---|
| 1 | Top Track (Inner Stabilizer) | 38055 | 43-7/8" | 11 | ||||
| 38057 | 44-7/8" | 13 | ||||||
| 38039 | 49" | 14 | ||||||
| 38069 | 42-7/8" | 18 | ||||||
| 38090 | 49" | 18 |
Top Caps – Reference #9 & #10
Top Cover/Outer Cap
Top Cover/Inner Cap
The Top Caps consist of (2) parts. There is a Top Cover/Outer Cap which is closer to the outside of the pool. The Top Cover/Inner Cap is installed on the inside of the swimming pool closer to the water. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' |
|---|---|---|---|---|---|---|---|
| 9 | Top Cover/Inner Cap | 16300 | 11 | 13 | 14 | 18 | 18 |
| 10 | Top Cover/Outer Cap | 16301 | 11 | 13 | 14 | 18 | 18 |
Top Joiner Plates – Reference #3
Top Joiner Plate Curved Side
The Top Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Joiner Plates.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' |
|---|---|---|---|---|---|---|---|
| 3 | Top Joiner Plate | 16298 | 11 | 13 | 14 | 18 | 18 |
Uprights – Reference #5
Curved Side Upright
The Uprights are the vertical posts on the outside of your swimming pool wall. Each upright post inserts into the bottom upright boot and connects to the top joiner plate with screws.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' |
|---|---|---|---|---|---|---|---|
| 5 | Upright | 29799 | 11 | 13 | 14 | 18 | 18 |
Upright Boot – Reference #8
Upright Boot
The Upright Boots connect your Bottom Tracks together on a round pool. Your curved side uprights will also clip into the Upright boots.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' |
|---|---|---|---|---|---|---|---|
| 8 | Upright Boot | 27117 | 11 | 13 | 14 | 18 | 18 |
Beaded Liner Track – Reference #7
Beaded Liner Track
Beaded Liner Track Installation
The Beaded Liner Track is installed on the top of your pool wall. Then the bead of your pool liner is inserted into the Beaded Liner Track.
Material: Resin
| Ref # | Description | Part # | Length | 15' | 18' | 21' | 24' | 27' |
|---|---|---|---|---|---|---|---|---|
| 7 | Beaded Liner Track | 22650 | 49" | 12 | 14 | 17 | 19 | 22 |
Bottom Track – Reference #2
Bottom Track
The Bottom Track (sometimes referred to as Bottom Rail) is where your pool wall sits.
The Bottom Track inserts into the Upright Boots on the swimming pool.
Material: Extruded Aluminum
| Ref # | Description | Part # | Length | 15' | 18' | 21' | 24' | 27' |
|---|---|---|---|---|---|---|---|---|
| 2 | Bottom Track | 38054 | 49" | 11 | ||||
| 38056 | 50" | 13 | ||||||
| 38092 | 54-1/8" | 18 | ||||||
| 38068 | 48" | 18 | ||||||
| 38091 | 54-1/8" | 14 |
Regular Slat
Skimmer Slat
Return Slat
Beam Slat
The Slat Wall system of the Intrepid pool features 4 different style aluminum panels that are assembled together to complete the wall of the pool.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' |
|---|---|---|---|---|---|---|---|
| A | Regular Slat | 26513 | 115 | 139 | 166 | 186 | 214 |
| B | Skimmer Slat | 22641 | 1 | 1 | 1 | 1 | 1 |
| C | Return Slat | 22642 | 1 | 1 | 1 | 1 | 1 |
| D | Beam Slat | 26515 | 22 | 26 | 28 | 36 | 36 |
Click on the tab below to view the Manufacturer’s Installation and Safety Instructions for the Intrepid Round Swimming Pool.
INTREPID ROUND INSTALLATION & SAFETY INSTRUCTIONSIntrepid Replacement Parts
Need a replacement part? Shop our selection of Intrepid Pool Parts by clicking on the tab below:
Shop Products
